You are here : Home » Product Range
» Sizing Machine
STAPLE FIBRE SIZING RANGE
PRASHANT
WEST POINT
Beam Creel
| Size Box |
Drying Section |
Head Stock |
Digital Controls
Direct Warping |
Creels
West Point the Original inventor of sizing machine - 130 years old company is known around the world for setting the standard in warp preparation equipment.
Prashant west Point is the joint venture of Prashant Group with West Point, USA. This joint venture is committed to provide world class sizing and warping machine.
TECHNICAL SPECIFICATIONS
| Beam Creel |
Maximum No. of Beams Section Beam Flange Diameter Brake Layout |
30 800 mm/1000 mm/1250 mm Band Brake/Shoe Brake Stationary/Magazine in the Module of 4 |
| Size Box |
No. of Boxes Sizing system |
up to 4 Single dip - Single nip or Double dip - Double nip |
| Dryer |
No. of Cylinders Layout |
up to 24 drying Cylinders.
Predryer in the multiples of 4 to 6, and final Dryer
having 4/6 or 8 cylinders. Many Options in Vertical/Horizontal configuration available. |
| Beam Winder |
Working width Beam flange diameter Max. Yarn Speed Carriage Tension Doffing |
1800 mm to 4000 mm up to 1250 mm 150 Meters per minute Both side motorised Auto Control Automatic Hydraulic Beam Doffing |
- Structural steel construction.
- Large steel floor brackets for rigidity.
- Guide rollers for separation of warp sheet and for yarn placement.
- Predetermine tension value is maintained from full to empty beam.
- Pneumatic shoe brake for uniform beam tension control.
- PLC Based controls for size box.
- Separate motors & drives for size rolls.
- Size rolls, S.S. claded on steel tubes having thick walls to prevent undue deflection
- Positive drive for minimum yarn stretch at the entry to the vat.
- Linear speed of the size applicator roll is precisely regulated through inverter drive to follow the linear speed of the machine and control elongation at minimum value.
- Indirect and direct heating to prevent undue dilution of size.
- External size circulation system with filtering is provided to remove the size lumps.
- Dryer divided into pre-dryer groups and final dryer.
- All cylinders except final two are Teflon coated.
- Moisture is measured after the final dryer and regulated through fully digitally controlled drive system.
- Cylinder temperature is controlled via process controllers.
- Yarn tension is maintained at the pre-determined value in each split.
- Plate steel fabrication for strength and rigidity. Machine cut frames for precise alignment.
- Urethane covered delivery roll and chrome plated nip roll.
- Automatic insertion and extraction of the beam for operating efficiency.
- hydraulically operated pressure roller system.
- Constant beaming Tension maintained through close loop system.
- Model MPB all type of yarns and model MPBW - Split beamer especially for coarser count.
 |
 |
| Main Menu | Stretch Control |
 |
 |
| Beam Creel Control | Moisture Control |
 |
 |
| Dryer Control | Size Box Control |
- The entire sizing operation is monitored and controlled by advanced electronics. Uniform and optimum sizing is guaranteed, resulting in to higher weaving efficiency.
- Operating panel having touch screen type colour graphic display.